"Mortarless" Clay Brick Installs

Sand-set brick without the use of a spacer, to prevent contact, can cause damage to the surface of the brick.

 Sand-set brick with the use of a 1/16" spacer and sanded joints.  This photo is at the same site as above.  Notice the lack of damage to the brick.

Sand-set brick using a 1/16" spacer and sanded joints.  A viber plate was used to level the brick surface.

Sand-set 24" X 24" slabs using a 1/8" spacer.  Sand-set brick pathway using a 1/16" spacer and sanded joints.

Epoxy-set stairs with sand-set landing using a 1/16" spacer.

Contact:  Email
shancock@paverhelp.com
sales@paverhelp.com

Sand-set landing with a 1/16" spacer.

  Sand-set brick with a 1/16" spacer and sanded joints, on a radius pathway.

Sand-set pathway with a 1/16" spacer.